Hi Scott. It sounds like this could be an MTU issue. NEWT currently needs the network card to be set for 1500 for the MTU and this is the Windows default. Albeit rarely, some programs may change this during installation.
You can scan your local machine and look inside NEWT\'s Network tab to see your MTU. If it\'s not at least 1500, then this is most likely your problem.
The fastest way to change your MTU setting is by finding your network card in the following location in the registry and changing the MTU value to 1500.
[HKEY_LOCAL_MACHINE\\System\\CurrentControlSet\\Services\\Tcpip\\Parameters\\Interfaces
You\'ll need to reset your machine for the changes to take effect.
If you have any trouble, please feel free to email us at support@komodolabs.com