Recent Posts
61
Slitheris Network Discovery - Support & General Discussion / Fixed in v1.1.276: Bug in Network scanner: Component 'iGrid' not registered
« Last post by pstein on May 01, 2018, 02:01:52 PM »After installation and creation of a portable version of Network Scanner I uninstalled the non-portable software and started the portable one (under 64bit Win7).
But I got always an error popup similar to
"The component iGrid or one of its dependecies is not correctly registered".
Hmm, I tried it two times but always with the same result.
Pls. fix this bug.
I want to run the network scanner tool from USB flash drive with varying drive letters on various computers.
Thank you
Peter
But I got always an error popup similar to
"The component iGrid or one of its dependecies is not correctly registered".
Hmm, I tried it two times but always with the same result.
Pls. fix this bug.
I want to run the network scanner tool from USB flash drive with varying drive letters on various computers.
Thank you
Peter
62
NEWT Pro Network Inventory - Support / Re: How to configure LAN for NEWT
« Last post by Komodo Support on February 26, 2018, 07:56:16 PM »Sorry, we do not have this yet. Since that post, we've had to alter our priorities on development. We still want to provide such a feature, but the earliest would probably be some time next year, unfortunately.
63
NEWT Pro Network Inventory - Support / Re: How to configure LAN for NEWT
« Last post by roberle on February 26, 2018, 06:22:52 PM »Has this feature been implemented now?
I just started using Newt Pro v2.5, build 327
I have some stations reporting "unreachable", but I can connect to them via Explorer.
They do not respond to a Ping.
These are some "locked down" stations, so I am looking for the ability to setup the Newt scanner and not require the $ADMIN share.
Please advise.
Thanks,
- R
I just started using Newt Pro v2.5, build 327
I have some stations reporting "unreachable", but I can connect to them via Explorer.
They do not respond to a Ping.
These are some "locked down" stations, so I am looking for the ability to setup the Newt scanner and not require the $ADMIN share.
Please advise.
Thanks,
- R
64
NEWT Pro Network Inventory - Support / Re: Error: 32 The process cannot access the file because it is being used
« Last post by SilkyBolt on February 13, 2018, 10:12:42 AM »I just upgraded to NEWT Pro version 2.5 Build 327, and I get this error on 3 systems out of 64. All three are HP Compaq Pro 6305 MT systems running Windows 7 whose BIOS I recently updated. I updated the BIOS on other systems of the same PC model, and they scan fine. Using a slightly older version of NEWT and prior to the BIOS updates, I was able to scan all 64 systems with no errors. I am able to get to each of these systems using the ADMIN$ share, and I rebooted each one prior to scanning.
What else should I check on these 3 systems to get them to scan?
Thanks.
What else should I check on these 3 systems to get them to scan?
Thanks.
65
Slitheris Network Discovery - Support & General Discussion / Re: Spiceworks CSV export error
« Last post by Komodo Support on January 30, 2018, 09:45:26 PM »Update about this issue. It turns out the tmcmurray had permissions set up in a way to prevent Slitheris from reading the Spiceworks database, which we believe is uncommon. Problem solved on user's end in this case.
66
Slitheris Network Discovery - Support & General Discussion / Re: Spiceworks CSV export error
« Last post by Komodo Support on January 26, 2018, 01:28:39 PM »Sorry I wasn't clear about that. Now that you mention it, maybe having BOTH would be best so we can compare them and see if Slitheris made a mistake some how.
If you'd like to email them in two separate emails and two separate Zips, that would be great. If they're way too big after zipping to email, let me know and we'll do it a different way. You could also upload them to a DropBox-type service if you use one and send us the link in email.
If you haven't seen it, we actually have a web page dedicated to this feature:
http://komodolabs.com/spiceworks
If you'd like to email them in two separate emails and two separate Zips, that would be great. If they're way too big after zipping to email, let me know and we'll do it a different way. You could also upload them to a DropBox-type service if you use one and send us the link in email.
If you haven't seen it, we actually have a web page dedicated to this feature:
http://komodolabs.com/spiceworks
67
Slitheris Network Discovery - Support & General Discussion / Re: Spiceworks CSV export error
« Last post by tmcmurray on January 26, 2018, 01:00:13 PM »Hi there and thanks for the compliment! We haven't heard of this, and we just tested it here with a fresh Spiceworks Inventory install without any issues. I can tell you this error means that when Slitheris tried loading your Spiceworks DB backup, it thought there were no devices in it or there was some other issue. But I'm sure you have or you wouldn't want to try this feature.
It would help a lot if we could see a copy of your Spiceworks (Spiceworks_prod.db) database. If that's ok with you, please Zip and send it to our support email. All data sent to us is kept strictly confidential and is only used for purposes of fixing this apparent problem.
Once we get this issue taken care of, we'd love for you to mention us and this feature in the Spiceworks forums. We've rarely been getting mentioned there lately and it helps a lot.
Which version? The prod version in Program Files, or the backup in user files?
68
Slitheris Network Discovery - Support & General Discussion / Re: Spiceworks CSV export error
« Last post by Komodo Support on January 25, 2018, 11:29:27 PM »Hi there and thanks for the compliment! We haven't heard of this, and we just tested it here with a fresh Spiceworks Inventory install without any issues. I can tell you this error means that when Slitheris tried loading your Spiceworks DB backup, it thought there were no devices in it or there was some other issue. But I'm sure you have or you wouldn't want to try this feature.
It would help a lot if we could see a copy of your Spiceworks (Spiceworks_prod.db) database. If that's ok with you, please Zip and send it to our support email. All data sent to us is kept strictly confidential and is only used for purposes of fixing this apparent problem.
Once we get this issue taken care of, we'd love for you to mention us and this feature in the Spiceworks forums. We've rarely been getting mentioned there lately and it helps a lot.
It would help a lot if we could see a copy of your Spiceworks (Spiceworks_prod.db) database. If that's ok with you, please Zip and send it to our support email. All data sent to us is kept strictly confidential and is only used for purposes of fixing this apparent problem.
Once we get this issue taken care of, we'd love for you to mention us and this feature in the Spiceworks forums. We've rarely been getting mentioned there lately and it helps a lot.
69
Slitheris Network Discovery - Support & General Discussion / Spiceworks CSV export error
« Last post by tmcmurray on January 25, 2018, 07:37:07 PM »Hi,
After I've completed a scan, which ROCKS by the way, I attemtp to exprt the .csv to my Spiceworks and it crashes with the error:
Everything else works fine and I'd really would like to get this export function working.
After I've completed a scan, which ROCKS by the way, I attemtp to exprt the .csv to my Spiceworks and it crashes with the error:
Quote
Grid Error:
C:\users\username\AppData\Local\Temp\Spiceworks_prod.db-
Please contact support@komodolabs.com for help.
Not an error
Everything else works fine and I'd really would like to get this export function working.
70
NEWT Pro Network Inventory - General Discussion / Re: Don't show hardware and software info
« Last post by Komodo Support on November 05, 2017, 03:16:43 PM »That's great to hear. We plan to add Slitheris features to NEWT Pro at some point in the future. So you'll have the best of both worlds in a single app.