June 05, 2020, 10:07:06 PM

Author Topic: Add exclusion IP/range  (Read 2472 times)

Davidh

  • Member
  • *
  • Posts: 9
Add exclusion IP/range
« on: May 25, 2017, 04:16:03 PM »
I have a few APC UPS with the management card. They have SNMP enabled, but also restricted to IP address.
Can we add a feature to exclude specific IP? The reason is that every time I run a scan I get about 30 notifications from the UPS

Komodo Support

  • Administrator
  • Member
  • *****
  • Posts: 2699
  • Dayton, Ohio, USA
    • Komodo Laboratories LLC
Re: Add exclusion IP/range
« Reply #1 on: May 30, 2017, 06:27:22 PM »
Hi David.  We will look into adding an IP exclusion feature soon.  In the meantime, perhaps we could avoid setting off the security alert by not accessing certain ports on APC devices.  We had performed some initial testing a while back and the issue seemed to be Slitheris accessing the UPS's web GUI, but it may be both web and SNMP.